Print PDF
Favorite
Email
Step 9Sewing On the Velcro
Attach the Velcro to both ends of the midsection piece at the bottom, tummy area of the harness, making sure to give just enough wiggle room for your dog and still be snug enough to comfortably support the wing structure. Make sure that the softer, "female" side of the Velcro is the one that will be facing your dog's skin as it helps to lessen the probability of tangling in their fur (Thats a concern for longer hair dogs).
Alternatively, if you have chosen to go with the safety pin as a closure, do it ONLY because your dog is not yet fully grown. Instead of sewing on the Velcro, use the safety pin to (CAREFULLY) attach both side of the harness together.
This is the option I have gone with on this project because my dog is only 5 months old and will grow to about 5 pounds when shes finished growing. Later though, when she is fully grown, I'll add the Velcro using the above steps.
Alternatively, if you have chosen to go with the safety pin as a closure, do it ONLY because your dog is not yet fully grown. Instead of sewing on the Velcro, use the safety pin to (CAREFULLY) attach both side of the harness together.
This is the option I have gone with on this project because my dog is only 5 months old and will grow to about 5 pounds when shes finished growing. Later though, when she is fully grown, I'll add the Velcro using the above steps.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
