Push-Start a Comatose Furby

Step 9 Attach Furby's Faceplate

Now using your hot glue gun put a small 1/8 inch bead of glue along the bottom of the faceplate's mouth. Careful not to get glue anywhere it could get caught in a gear or mechanism or matted into Furby's sensative fur. While the glue is still hot place the face back onto the Furby and align it. Make sure the optical sensor lens (above Furby's eyes) is flush in the faceplate and there is no fur caught in between. Hold the faceplate on untill the glue sets good. Now place a small bead of glue between the head and very top of the faceplate again making sure not to get glue in any moving parts or fur. (See Arrow) Hold the faceplate in place while letting the glue set.

Comments

[dclark21]

Fortunately for me, I had a Coma Furby that used screws to keep the faceplate on instead of glue. I do not own a glue gun. I was happy.