Put spray paint in to other unsuspicious cans

Step 3 Making the tube

Now that you haave the small tube Get your lighter and melt one end

while it is still hot put the tube over the tube already on the axe can so that it can form its shape

Now take it off so that it can cool down and form

After it is cool cut the edges off of theother endso that it kind of looks like an arrow

Comments

[last_decoy]

ok... i have been mixing my paint for years, or putting near empties together... put the can u wan paint in, into a freezer for 30 min. cool gas has molecules that are closer together, so less pressure. and then warm on can up in luke warm water, NOT HOT! its pressure will increase. then go to a shop or 0ebay and buy a $0.40 nib that is designed for mixing paint!! connect the nibs. hold the warm can upside down and the one you want to fill normal way up. hey presto! ps: by-the-by its not a crime carrying spray paint. however caught hiding it? IS SUSPECT! pps: im not raining on anyones parade just giving extra advice.

[AustralLord]

could you put up photos of what the arrow point looks like? i think im making it too short or to thick, not sure.