We've decided we wanted to make a puzzle table for a project at school.
First we looked at some designs at the internet to get some ideas for our own design.The last two pictures are our inspiration for the Puzzle Table.
Our idea was to make a puzzle table out of 4 pieces so you can use every part as a little table. And if you put the 4 pieces together you will have one big table.
We choose which material we wanted to use and then we made a design in illustrator and changed it until we were happy with the outcome of the design. We put the design in the computer of the milling machine and the machine created our design in the wood we choose (MDF).

We got our inspiration from: http://www.instructables.com/id/Patio-Table/ and http://www.thingiverse.com/thing:5010 

Dit werk is gelicenseerd onder de licentie Creative Commons Naamsvermelding 4.0 Internationaal.  Ga naar http://creativecommons.org/licenses/by/4.0/deed.nl om een kopie van de licentie te kunnen lezen.

About This Instructable


37 favorites


More by OpenDesign: 3D-printed Chess Piece (Pawn) Puzzle Table
Tags: Puzzel tafel
Add instructable to: