Introduction: Quanum V2 FPV Goggle Second Camera Mount

Picture of Quanum V2 FPV Goggle Second Camera Mount

As I was browsing on Banggood I came across a really cheap USD$9 FPV
camera, at the time of placing the order I had no idea what I was going to use it for, but upon its arrival in a weeks time I had an idea.

I decided to use it as the 2nd camera on my Quanum V2 goggles. This is what I came up with, a design which mounts to the back bracket features of the V2 monitor using zip-tie. And an open design to allow airflow to keep the board from overheating.

I dunno how useful this is for many people as I designed it based on the cheap FPV camera I got. You can find it at the link below.

http://www.banggood.com/DAL-700TVL-FPV-HD-14-COMS-Camera-Module-Wide-Angle-p-957174.html

The zip-tie I use is the small 100mm x 2.5mm sized.

Comments

About This Instructable

1,559views

16favorites

License:

More by yuenchitat:Quanum v2 FPV goggle second camera mountWalkera Runner 250 Battery Barrier + Low Voltage Alarm Compartment ( require the use of balance lead extension )Walkera Runner 250 Front Camera Protection Bumper
Add instructable to: