With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Extra sweet & just in time for your Valentines giving. This quick and easy no sew 3 in 1 template can be used for a coin purse, a key fob, or a ring c...
FINISHED HEART IS Approximately 3.5" x 3.5" Print template PDF file Double Face Tape 7.5" x 5.5" Scrap of Leather, Heavy Vinyl, Sheet Ru...
Careful Trim Out Template and Punch Holes for Marking Using Double Face Tape to Attach Template to Material (here we are using red leather fo...
Remove Pattern Carefully Cut Out Transferred Pattern on Material Punch Holes for Snaps Use Care when Trimming Large Holes in Section...
One at a Time Place Post of Smooth Cap Part of Snap thru Hole in Section One with Finished Side of Material Facing Out Place Socket of Snap o...
One at a Time Place Back Post Part of Snap thru Hole in Section Two with Finished Side of Material Facing Out Place Stud of Snap over Back Po...
Place Holes in Section 3 over Section 2 Snap Studs Then Snap Section 1 Snap Sockets thru Holes in Section 3 and Snap to Section 2 Snap Studs ...
Place two Key Rings Together Unsnap Heart and Lay Flat Place One Key Ring Over Inner Snap Position Section 3 Over Key Ring and Secti...
Be Sure to Pop Out Smaller Pair of Holes in Section 3 Cut a .25" Wide Strip Approximately 12"-16" Long, or Use a Ribbon, Shoe Lace, etc... ...
Additional Images of Ring Case & Coin Purse
![Heart Snap (16) [1024x768].JPG](/files/deriv/F5U/6NFU/GYE873PU/F5U6NFUGYE873PU.LARGE.jpg)
![Heart Snap (17) [1024x768].JPG](/static/img/pixel.png){kind=tracking}
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »