Print PDF
Favorite
Email
Step 2Cutting
After you have washed and dried the two towels, press out the wrinkles.
Then take the towel that you will be using for the side panels, fold it in half shortways, and press the fold so you will have a guideline to cut by. Then cut it in half on that foldline. You will end up with two pieces the size of the plaid towel in Picture2 (approximately 16 inches by 13 inches).
On the RAW edge be sure to mark (with a pin) the top right and the top left so your designs will be matching when you apply the side panel to the center towel. See box in Picture2.
Then take the towel that you will be using for the side panels, fold it in half shortways, and press the fold so you will have a guideline to cut by. Then cut it in half on that foldline. You will end up with two pieces the size of the plaid towel in Picture2 (approximately 16 inches by 13 inches).
On the RAW edge be sure to mark (with a pin) the top right and the top left so your designs will be matching when you apply the side panel to the center towel. See box in Picture2.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
