Print PDF
Favorite
Email
Step 3Making holes.
To make the tripod hole I made two small slits in the shape of a cross then pressed the tabs upwards a bit.
To attach the tripod I simply forced the bolt through the hole and twisted clockwise a few times, the corners of the tabs end up in the thread making a really rudimentary but surprisingly sturdy join between the two.
If you have a drill then a quarter inch hole would attach a tripod bolt nicely.
If you wish you can use BluTac or tape to attach the tripod.
To attach the tripod I simply forced the bolt through the hole and twisted clockwise a few times, the corners of the tabs end up in the thread making a really rudimentary but surprisingly sturdy join between the two.
If you have a drill then a quarter inch hole would attach a tripod bolt nicely.
If you wish you can use BluTac or tape to attach the tripod.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
