With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In the not too distant past, you would buy milk, sodas, etc. in glass bottles which you would return to the store to be sterilized and used again. Now...
Cut the top (just before the start of the cone) off a 2 liter bottle.Invert the cone and place it inside the straight part of the bottle.Glue the two ...
Make a diagonal cut somewhere in the straight part of a 2 liter bottle (depending on what size you want it). You now have a scoop. We use one for the ...
Cut the cone part off a clear plastic bottle, and you are left with a handy holder that you can see inside of. We use ours for nuts, bolts, nails, etc...
When you want to start a seedling in the ground a little early, but fear it could be chilly, you need a cold frame. It's like a little greenhouse. Cle...
Use one of the cones you have cut off for either the handy holders or the cold frames. It makes a great cookie cutter.
Use a wide-mouthed bottle for this.Separate the cream from your cow's or goat's milk and allow it to ripen a little. If you allow the cream to ripen a...
Fill the bottle with dirt and you have a brick. Dirt is a very cheap building material, but you usually need it to be a certain quality, with a proper...
Cut the cone off a small plastic bottle.With a box cutter, cut the thread off the mouth of the bottle, so that it is smooth.Take an old incandescent l...
Cut a small bottle in half. You can use both halves. Using one half cut a Z groove on the open end. Directly opposite of the bottle, but still on th...
Fill bottles with water and put them in the freezer. You can use them in an ice chest to keep things cold on the go. You can also put them in your fri...
Here are some ideas that we haven't put together yet:Chicken Waterer - this is similar to the hummingbird feeder: Humming Bird Feeder The difference ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
infernisdiem
says:
Nov 12, 2012. 6:53 PMReply
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »