Instructables

Quick and easy homestead uses for Plastic Bottles (PET)

Featured

Step 9: Electric Fence Insulator

Picture of Electric Fence Insulator
Cut a small bottle in half. You can use both halves.

Using one half cut a Z groove on the open end. Directly opposite of the bottle, but still on the open end, cut another Z groove, and make sure to make it a mirror image of the first.

Now, on the closed in, make a slit or large hole for your post to run through both sides of the bottle. Near the slit, make two small holes, either side of the post slit. Use this end to wire to the post, and run the electric fence through the Z groove.
 
Remove these adsRemove these ads by Signing Up
what is this i don t understand
it is to keep the electricity in an electric fence from grounding on each of the metal poles it is held up with
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!