Took apart an unneeded BT Home Hub 3, as a nosy geek is wont to do. Was pleased to find that the RJ45 ports were mounted straight up from the board, instead of the usual 90° to stick out the back. Screw the whole board to the wall, jam both ends of an unstripped CAT5 into a RJ45 plug, crimp and you have a handy key rack :)
I think if you a step by step of the easy -ible this would be awesome!

About This Instructable




More by Shepy:Quick and easy, yet funky key rack 
Add instructable to: