With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I needed an airbrush holder next to my makeshift spray booth. This was a perfect opportunity to make something from whatever I had in my garage!! The ...
MATERIALS: Scrap wood Dowel/handle Wire Plasti-dip Wood glue TOOLS: Drill press/ power drill Soldering iron Pliers
I started with the base. I had a square-ish block of scrap wood left over from another project. I also had a handle from a cheap foam paintbrush. I dr...
I bent the holder into shape out of some multi purpose wire. I made the holder first then the support wire and soldered them together. It took a few t...
Next I dipped the wire in plasti-dip. I did 3-4 coats, I cant remember exactly which. I hung it from a hook on the roof of the garage while it dried. ...
So with my foam handle there was already a hold drilled in one end, so I simply curled the end of the support wire and stuck it into the handle end an...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »