Print PDF
Favorite
Email
Step 7Fill in the Ground Plane
It's easier on your etchant (and sometimes has beneficial electrical properties) if you keep a fair amount of copper on the board to use as a very-low-impedance ground path.
And it gives you something to do with the Chisel-tip Sharpie.
If you feel like it, you can do split power/ground planes. For some circuits you may want bypassing capacitors between the two planes scattered liberally around.
And it gives you something to do with the Chisel-tip Sharpie.
If you feel like it, you can do split power/ground planes. For some circuits you may want bypassing capacitors between the two planes scattered liberally around.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
