Print PDF
Favorite
Email
Step 5Separation
Separate/break the intended section of the module off from the rest of the module.
You may now set the unwanted section aside for further uses...
Once the board, that the little black thingys are mounted on, is thin enough, it should snap easily in your fingers. The result of the snap is shown in the pictures below.
You may now set the unwanted section aside for further uses...
Once the board, that the little black thingys are mounted on, is thin enough, it should snap easily in your fingers. The result of the snap is shown in the pictures below.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
