loading
Purple goes to the left motor and green to the right. The pickup holes are made from plastic straws and the mount is Lego pieces that are superglued together. Non of these pieces are from a hobby grade water cooling set.

Step 1: Main Water Line

This is the main water feed line this allows for the water to be set to its next destination. This us made of hollow jump rope wire(orange). And glow sticks.

Step 2: The Water Cooling Over the Motors

This is the look of the water lines over the motors.

Step 3: Exit Outlets

This is the exit holes for both left and right motors.
<p>cool but are you sure the inlets work</p>
Please feel free to commebt

About This Instructable

2,047views

17favorites

License:

More by brysenwwe:DIY PVC bow 75+ lb draw!  Pvc Bow 70+ lb draw!  Slingshot  
Add instructable to: