Print PDF
Favorite
Email
Step 6Extending the switch
Using the same method as the previous step, I drove a machine screw into the top of the periscope.
The periscope happens to be the power switch for the submarine. I chose a screw with a large head.
it will be concealed inside the duck, but accessible via a hole, in the ducks back. You want it to come close the the duck shell with out touching it, so you can push it with a key or a small screwdriver.
(yes I'm and old school Mac user)
you may want to take some measurements, with the duck pre-assembled to get the screw length right.
The periscope happens to be the power switch for the submarine. I chose a screw with a large head.
it will be concealed inside the duck, but accessible via a hole, in the ducks back. You want it to come close the the duck shell with out touching it, so you can push it with a key or a small screwdriver.
(yes I'm and old school Mac user)
you may want to take some measurements, with the duck pre-assembled to get the screw length right.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
