Introduction: REMIX: Hepa-13 / Active Carbon Filter for Air Filter / Solder Fume Extraction/3D Printer

Picture of REMIX: Hepa-13 / Active Carbon Filter for Air Filter / Solder Fume Extraction/3D Printer

This is a remix of the 3d Printed parts associated with:

Particle / Active Carbon Filter for 3D Printer / Solder Fume Extraction

(https://www.instructables.com/id/Particle-Active-C...)

Here the filter and motor halves were modified to handle a Hepa-13 Filter, specifically the Phillips FC8038/01 FC8031 HEPA 13 Filter

Step 1: 3D Printed Parts Explanation

Picture of  3D Printed Parts Explanation

Here the two filter halves were modified to handle the Phillips Hepa-13 Filter and new supports to handle the larger size..

New STL's can be found @: https://www.thingiverse.com/thing:2611727

Comments

About This Instructable

510views

8favorites

License:

Bio: Retired tinkerer, programmer ...
More by GSink:REMIX: Hepa-13 / Active Carbon Filter for Air Filter / Solder Fume Extraction/3D PrinterParticle / Active Carbon Air Filter Using a 120mm Delta High Static Pressure 12V Fan, Arduino Pro Mini 3.3V As PWM Control, and 3D Printed Cases3D Printable Solder Fume Extractor / Air Filter: the Two Towers
Add instructable to: