Step 8: Put everything into the enclosure, load final code
By now you should have an RF reader that reads your tag, a cd tray that opens and closes automatically or manually depending on the mode switch, and a proximity sensor that prevents the door from closing when the cat is eating. Build the enclosure, put everything in it, make sure no wires are in the way of moving parts. for the animal's protection, make sure the enclosure is shut.
Final code for this project: http://www.writtensound.com/arduino/cat_feeder7.pde
Final code for this project: http://www.writtensound.com/arduino/cat_feeder7.pde
Remove these ads by
Signing Up
Visit Our Store »
Go Pro Today »
Do you think the RFID implanted in the dog/cat 's neck will work?
http://www.writtensound.com/arduino/cat_feeder.htm
hopefully that helps