Step 4: Glue
1. Glue with the fabric glue the little conductive fabric squares in the middle of tow of the bigger squares as it appears on the pictures.
2. Take third square and cut a hole in the middle of it (it will used for the LED), around this hole glue the leafs in shape of a flower or any other shape that will desire to.
2. Take third square and cut a hole in the middle of it (it will used for the LED), around this hole glue the leafs in shape of a flower or any other shape that will desire to.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
