Step 1: Materials
the first part is the key chain, in order to make the key chain you will need the following:
1. RJ-45 plug crimper
2. cutting or sleeving tool
1. 2 pair or more network cable
2. RJ-45 plugs (male)
3. colored rubber protector for RJ-45 plug
4. key ring
the second part is the rack for the key chain. it is optional. in order to make the rack you will need the following:
1. depending on the type of wall and the type of mount.
1. wall mounted box for RJ-45 jacks
2. RJ-45 jacks (female)
Step 2: Key chain step 1 : disassembling and cutting the cable
disassemble the cable, identify the parts and keep the parts mentioned above.
the minimum length of cable we can use is 10cm because that gives a little tail popping out of the rubber protection. you may use more if you want a longer tail.
choose the color of wires you want and cut them to the desired length.