ROV submersible (PVC)

Step 12 Building the lamp

Step 12:
(the sub needs a source of light down in the depths)

---Many readers have asked me if I have any plans for adding anything more to my ROV. Yes, i have. Unfortunately i havent had all that much time to work on it, but here is what i have been able to make in the last couple of weeks. The waterproof ROV lamp.

***Parts you'll need for the lamp***
-PVC parts(i used some common fittings from a kitchen sink piping system as thats what i had available at the time and they suited the purpose of having a screwable cap with a hole for a 'window')

-Plexiglass(for the 'windows')

-sillicone sealant(to fill in those holes :P)

-rubber washers

-some wire

-tape

-a Dot-it 3LED lantern(i used one of these as it already had the circuitry readymade and it would be quicker)

-AAA batteries for the lantern

-one small switch

(sorry all the materials are not in the picture, but in later pictures you can see them)


***Tools***
-pliers
-cutting knife
-solder set
-scissors
-screwdriver(phillips)