Print PDF
Favorite
Email
Step 15Wiring the electronics
Step 15:
(wiring the LED's to a battery)
---Solder two wires to the PCB board to which the LED's are attatched as in the picture.
---Now Connect the AAA batteries in series by taping them together and connecting with wires. If you have a small battery holder then that would be better, but i didn't have one.
---Connect them to the LED's and voila, we have light!
---Now cut one of the wires and solder a switch to it. This i did as i would stick the LED board to the window/plexiglass and reflector piece, so the plunging switch on it wouldnt be accessible.
Put a blob of glue onto the connection point to make sure the soldering doasnt come undone.
The electronics are now ready...
(wiring the LED's to a battery)
---Solder two wires to the PCB board to which the LED's are attatched as in the picture.
---Now Connect the AAA batteries in series by taping them together and connecting with wires. If you have a small battery holder then that would be better, but i didn't have one.
---Connect them to the LED's and voila, we have light!
---Now cut one of the wires and solder a switch to it. This i did as i would stick the LED board to the window/plexiglass and reflector piece, so the plunging switch on it wouldnt be accessible.
Put a blob of glue onto the connection point to make sure the soldering doasnt come undone.
The electronics are now ready...
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
