-Easy to build
-good range fort a pistol
-takes about 5 mins if ur used to it.
-ot really muck pieces
-(I think) Great design
-uses one modified piece if you want to shoot green rods
(Gunlooks a bit diffirent then in this Picture, this is v1)
Step 1: Handle and Trigger.
2.Make this 2.
3. Other Angle.
Step 2: Barrel
1-10. The main barrel with diffirent angles. (bcz i know this is the hardest part)
11. Maker this.
12.Make this 2.
13-17.Attach like shown at the PIc's!
18-21. Attach this too (Nothing keeps it inplace)
Gratz yo made the hardest part!!!
Step 3: Making the Gun!!!
2.Put the 2 green rods and the 2 white rods of the handle already to the barrel (this is easier)
3.Between the 2 blue spacers and the triggers there's a hole put the trigger int oit.
5.Put a rubber band onto the trigger and onto the barrel.
6.Make a ramrod (the red sh.t is tape)
7.Put it into the barrel.( between the tan clips)
8.Put bigger rubber bands on the ramrod and onto the barrel.
Gratz you made the gun.
If you know how to shoot it skip the next part!!!
Don't forget to rate!
Step 4: How to Fire.
(duhh basic ramrod gun)
1.Pull back the ramrod until it clicks and doesn't shoot back.
2-3.Load any kind of rod into the front of the barrel.
4.Pull back the yellow connector (the one with the rubber band) to shoot!
5.A part of the ramrod will stick out of the barrel.
6.Do the same to shoot again.
ENJOY AND DON''T FORGET TO RATE!!!