Print PDF
Favorite
Email
Step 6Wiring...
After making a note of where all the wiring is, unsolder all of the connections. You will end up with a waveguide, switch (not used), LCD diplay and battery compartment connector (not used). Solder new wire to the new toggle switch following the same pattern as the old one. Solder new wire to the waveguide.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Sep 12, 2007. 2:22 PMSicVic426
says:
first
Reply
 |
Add Comment
|
