With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Introducing the new Radio Wave. This new Product will revolutionize how sailors and water sport enthusiasts will listen to the radio, or just put mus...
This is a list of the materials that you will need to build the radio wave . 1 working radio chip and speaker . arox 1sq M of fiberglass matting . ar...
This is an exploded Diagram of my final radio. This should make putting the radio together easier once you have made all the parts.
I started by dimanteling the radio we had been given. There were only a few screws to take off the outer casing to get to the circuit board. It is a s...
Step 2 Step one is the making of the impact resistant and waterproof outer shell. The things you will need are 1. A well ventilated space either out...
Step 3 I moved from my shed at home into the University workshop for the next stage. Many may not have some of the tools or these kind of facilities ...
Step 4 Next I marked where the disk would sit on the inside of the cone. This allowed me to cut off the excess around the bottom. I cut it with a hac...
Step 5 Next i made this fixing that will hold the bottom disk onto the cone. To do this i cut out 4 pieces of wood that had one face that is at the s...
Next I got an old bike inner tube to make a seal around the disk. I cut a piece much smaller than the disk and sewed it together with a needle and thr...
The next step in the process was to create the correct shape on the outside of the fiberglass cone. To make my desired pattern to make it look like a ...
To make the dials to control the volume and tuning i used the universities laser cutter. I made the shape in adobe illustrator and sent it to the cutt...
I sprayed both parts of the casing with an off white gloss. I had to do two coats to give a good finish. this will really make it stand out and give i...
Ok. by this step you should have finished building all the parts you need to start putting the radio together. I have drawn an exploded diagram labeli...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »