Print PDF
Favorite
Email
Step 6Mesures
Well here, the final step : get the voltage values with the multimeter, to find the right place to connect your wires with the solder. but DONT solder the capacitator poles, be gentle just don't sold the capacitator :
Follow the circuit until another 2 poles of dc current and sold the wires there
I'ven't photos yet because i'ven't 4 hands " and the 3rd hand isn't photographer " . But simply put a little bit of solder wire on the existing pole and put the wire on, just like a simple soldering method.
/!\ Not for kids, Solder Iron is dangerous /!\
And be careful to don't destroy the radio
In the multimeter is show - 11.34 just because i've put the wires in the bad polarity. Nothing interesting. The voltage in DC is 11.34 V !!!
Next get 2 longs wires and sold' them to the capacitator and put the wire out of the radio (from a free hole for example) and assemble the radio, as you disassemble it .
Just enjoy this radio/clock hack !
Follow the circuit until another 2 poles of dc current and sold the wires there
I'ven't photos yet because i'ven't 4 hands " and the 3rd hand isn't photographer " . But simply put a little bit of solder wire on the existing pole and put the wire on, just like a simple soldering method.
/!\ Not for kids, Solder Iron is dangerous /!\
And be careful to don't destroy the radio
In the multimeter is show - 11.34 just because i've put the wires in the bad polarity. Nothing interesting. The voltage in DC is 11.34 V !!!
Next get 2 longs wires and sold' them to the capacitator and put the wire out of the radio (from a free hole for example) and assemble the radio, as you disassemble it .
Just enjoy this radio/clock hack !
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
