PLEASE follow and like!!! HONEST FEEDBACK PLEASE! This is the rainbow loom Poodle! Remember to check for updates! Make sure your loom looks just like the pictures! NOT ALL PICS ARE MINE!!!! I'm still kinda new to the instructables app

Step 1: Materials

You will need:
A loom
A hook
Rainbow bands
A clip

Step 2: Colors

You could use ANY colors you want but I'm going to use(just replace the colors listed below with your colors):

Purple: fluffy hair/fur
Black: eyes and nose
White: shaved part of fur/hair

Step 3: The Poodle's Legs and Arms

Take a rubber band( I'm using white) and twist it into a figure 8. Then put the two holes of the figure 8 together to form a cap band and place it on two pegs horizontally. The legs and arms are made the same way and all of the rubber bands used for the arms and legs should be going horizontally.Continue placing the rubber bands about 3 more times and add a cap band that is looped on the last peg 3 or 4 times and loop them like the extensions of a rubber band bracelet. Then take it off the loom and place it on a tooth pick. Repeat the steps until you have 2 arms and 2 legs that look the same

Step 4: Beginning

Make sure the arrow(if your using a rainbow loom) of your loom is pointing TOWARDS you.(pointing at you) and place 2 rubber bands(the color of your poodle's fur) on the top and bottom pegs that surround your loom's arrow

Step 5:

Now place 2 more on EACH side(make sure it matches the picture!)

Step 6:

Now (use the color of the poodle's SHAVED fur) place two rubber bands going horizontal in the middle row of pegs( from this point on, you have to double all or your rubber bands) and 1 rubber band on each side

Step 7:

Now place 1 rubber band from the sides to the middle(remember to double the rubber bands!) diagonally

Step 8: The Poodle's Neck

Now place 3 rubber bands(instead of doubled it is tripled) in the middle row of pegs

Step 9: We're Doubling the Bands Again!

Remember to double the bands again! Place (the color of poodle fur that is NOT shaved) a rubber band from the neck to the right going diagonally then do the same from the neck to the left

Step 10:

Now place one rubber band from the neck horizontally in the middle row of pegs(doubled and the same color of poodle fur that isn't shaved).

Step 11:

Now place 2 doubled bands to all of the rows.( color of an unshaved poodle fur)

Step 12:

Now place 2 doubled bands( color of shaved poodle) in the middle row. Then add 3 doubled bands to the left and right rows

Step 13:

Now place ( the color of shaved poodle fur) a doubled rubber band diagonally from left to the middle. Then do the same from the right to the middle

Step 14:

Then put the legs on the last left and right rubber bands

Step 15:

Then place the arms on the last UNshaved poodle fur colored rubber bands on the left and right rows

Step 16:

Double bands!Just look at the pictures it explains it all!

Step 17:

Single band! Look at the picture!

Step 18: Muzzle

Now take your hook and wrap a black rubber band around it 4 times. Then take an unshaved poodle colored rubber band and put it on the curved part if the hook. Then slide the black rubber band onto the other rubber band and place the other rubber band fully onto the hook. Then place the muzzle onto the rubber band above the neck that is triangle shaped

Step 19: Looping!

On the left row, reach in the hole and push it back. Then grab the top two on the peg and pull it out. Then loop it to the middle peg. Do the same to the other side