Instructables

Rainbow Loom- Triple Single Bracelet!

Picture of Rainbow Loom- Triple Single Bracelet!


 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
13, 6:08 PM.jpg
13, 6:08 PM.jpg
Rainbow loom, hook nd bands

Step 2: Start

Picture of Start
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
Hook one rubber band on the first two pegs where the arrow is pointing away from you. Continue for all of the three rows

Step 3: Triangles

Picture of Triangles
13, 6:08 PM.jpg
Make triangles all the way down except the last one. Leave three pegs open at the end (ignore my picture I forgot to not do that until later

Step 4: Hook Connect And Repeat

Go underneath the black and hook the color underneath and onto the next peg, repeat for all bands except black

Step 5: Pul

Picture of Pul
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
Put your last three bands onto the middle peg and stick your hook into that and put it onto the sleeve thing and pull of the loom

Step 6: The Wrist Connector Thing

Put the bands through and around the peg. The pictures explain it

Step 7: Add C Clip And Pull

Picture of Add C Clip And Pull
13, 6:08 PM.jpg
13, 6:08 PM.jpg
13, 6:08 PM.jpg
Add a c clip onto the last one and pull off and connect it to the last black one on the triple thing

Step 8: Done

Picture of Done
Your done now go show it off and comment follow and favorite. Sorry for my poor instructions look at the pics and comment if you have any questions I'm in a hurry. Thanks- smdt
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!