Introduction: Rainbow Loom Chain Bracelet
Step 1: Getting Your Supplies
You will need any loom in the v configuration, a hook, 25 bands, and a c or s clip. Let's get started!
Step 2: Placing Bands
Start by taking a single rubber band, and place it from the first peg to the bottom peg
Step 3:
Place another band from the bottom peg to the next top peg
Step 4:
Do this for the rest of the loom
Step 5:
Flip your loom to the other side
Step 6: Looping the Bands
Start by looping the band from the second to last peg to the next peg. Be sure to hold down the bands so they won't pop off.
Step 7:
Reach under the peg that the last band was just looped to, and grab the bottom band. Loop it to the next peg.
Step 8:
Do this to the rest of the loom.
Step 9: Pulling Off the Bracelet
Place your clip on the last band on the last peg.
Step 10:
Pull off your bracelet, and secure your clip to the loose band on the other side.