Introduction: Rainbow Loom Pencil Grip

Hey guys!Today I'm gonna show you how to make a Rainbow Loom pencil grip.

Step 1: Materials

You will need:

A loom
A hook
A lot of bands.(I'm using gold)
A pen or pencil

Step 2: Foundation

Take 4 bands and twist then into figure eights and place them on the loom as shown.

Step 3: Adding Layers

Take four more bands and place them as shown.

Step 4: Looping

Take the 2 BOTTOM bands and loop them to the middle. Now,repeat this on all the corners.(This is like the hexafish.)

Step 5: Repeating

Repeat steps 3 and 4 until you reached your desired length.

Step 6: Taking It of the Loom

This is kinda tricky so bear with me.Take your hook and slip through all the bands in one corner.Then slip the SAME HOOK through all the bands NEXT to the CURRENT location of the hook.Do the same on the other side.

Step 7: Putting It on the Pen.

Now,stretch your grip so there's this hole for you to slip the pen in.

Step 8: Securing

Take one set of the bands and loop it over the top of the pen.Do the same for the remaining three sets.

Step 9: Finished!

Now,enjoy your finished grip! :D


Evelyn 123 (author)2016-01-03

very helpful thanks

tde jesus (author)2014-06-05

craftclarity,it is! you should try making one!

craftclarity (author)2014-06-05

Looks like a comfy way to hold a pen for drawing!

About This Instructable




Bio: Mostly Rainbow Loom
More by tde jesus:Rainbow Loom Micro Heart CharmRainbow Loom CollectionRainbow Loom Samoa Cookie Charm
Add instructable to: