Introduction: Rainbow Loom Single Bracelet
Step 1: Placing the Bands
You start by takin one elastic and putting it where I showed.
Step 2: Placing the Bands
Next, you take another color and put it in the opposite direction.
Step 3: Placing the Bands
As you continue to put it on it should start to look like this.
Step 4: Placing the Bands
In the end of placing it should look like this.
Step 5: Placing the Bands
Now you have to flip over your board.
Step 6: Looping the Bands
Step 7: Looping the Bands
Loop this elastic over to the one diagonal from it.
Step 8: Looping the Bands
Step 9: Looping the Bands
The elastic's should be rapped around itself.
Step 10: Looping the Bands
Step 11: Looping the Bands
You loop the other elastic to it diagonal elastic like the one before.
Step 12: Looping the Bands
You continue to loop the bands diagonal all the way up the board.
Step 13: Looping the Bands
After all the steps, the bracelet should look like this.
Step 14: Finishing Up the Bracelet
To finish the bracelet you can use a c clip or an s clip to hold together your bracelet.
Step 15: Finishing the Bracelet
You should put the clip on the end that you finished with. You clip the hook to this end and then you can take it off by the clip.
Step 16: Finishing Up the Bracelet
In the end the bracelet should look like this.
We have a be nice policy.
Please be positive and constructive.