Introduction: Rainbow Rain Wax Art

Picture of Rainbow Rain Wax Art

In this instructable I will show you how I made rainbow rain on a silhouette using colored wax

Step 1: What I Used ...

Picture of What I Used ...

Here is what's needed for this art project:

  1. Bunch of wax crayons, different colors.
  2. X-acto knife
  3. Paper
  4. Glue Stick
  5. Blow dryer
  6. Paint tape

Step 2: Cut the Crayons

Picture of Cut the Crayons

First cut the crayons in half vertically then cut them in half again horizontally.

This will help the crayons stick easily to the paper.

Step 3: Draw the Silhouette

Picture of Draw the Silhouette

Now draw a black silhouette of a man holding an umbrella in the middle of the page.

Use the glue stick to glue the crayon on top of the page right above the silhouette.

Use the paint tape to cover the silhouette.

Then trim the tape to the shape of the umbrella using an X-acto knife.

Step 4:

Picture of

Put the picture upright, crayons on top.

And using the blow dryer on high hot setting, melt the crayons over the silhouette.

Step 5: End Result

Picture of End Result

Take off the paint tape and enjoy the art work.

Comments

About This Instructable

583views

16favorites

License:

More by eliesalame:Print the IP Address on LCD From Arduino and Ethernet ShieldGame of Thrones Music BoxOne Pot 5 Vegetables Veal Shank Soup
Add instructable to: