loading
Rainbow loom is a bracelet that is made out of little rubber bands.

Step 1:

First, take loom out of the box.

Step 2:

Second, start from the side with arrows pointing toward you.

Step 3:

Third, lay the first rubber band.

Step 4:

Fourth, lay the 2nd rubber band.

Step 5:

Fifth, continue laying the rubber bands until you reach the end.

Step 6:

Sixth, turn the loom around so now the arrows are pointing toward you.

Step 7:

Seventh, use the hook to pick up the 2nd rubber band.

Step 8:

Eighth, pull it up so it releases from the pin pull it and hook it on to the forward pin.

Step 9:

Ninth, pull ht third rubber band up so it releases from the pin pull it and hook it on to the forward pin.

Step 10:

Tenth, repeat the steps 7,8 and 9 until you reach the other side if the loom.

Step 11:

Eleventh, loop the last rubber band on to the adjacent pin.

Step 12:

Twelfth, secure the last rubber band with a c clip and remove it from the loom

Step 13:

Thirteenth, Secure the other end with the c clip.

Step 14:

Fourteenth, ENJOY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

About This Instructable

6,699views

8favorites

License:

More by gracemihm:Rainbowloom Bracelet Rainbow Loom Bracelet  
Add instructable to: