Print PDF
Favorite
Email
Step 4Apply glue and close the tube
Turn the assembly on the other side and fill the bevels with wood glue. Spread the glue evenly along the bevels to maximize the strength of the joints.
Close the tube using masking tape. Once the tube is closed, "clamp" the assembly using multiple pass of masking tape. Let the assembly dry for a few hours.
Close the tube using masking tape. Once the tube is closed, "clamp" the assembly using multiple pass of masking tape. Let the assembly dry for a few hours.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
