Print PDF
Favorite
Email
Step 2Mark and drill drip holes
Mark the two 36" long pieces of PVC for the drip holes. The holes are 1" apart.
Once the hole locations are marked, drill 1/16" holes at each mark. Please note that the holes ONLY GO THROUGH ONE SIDE OF THE PIPE. DO NOT DRILL THROUGH BOTH SIDES OF THE PIPE!
Once the hole locations are marked, drill 1/16" holes at each mark. Please note that the holes ONLY GO THROUGH ONE SIDE OF THE PIPE. DO NOT DRILL THROUGH BOTH SIDES OF THE PIPE!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
