Instructables

Rapid Technique: Preparing Plastic CNC Milling "Blanks" for Parts Used in Prototyping Scientific Equipment

Step 19: Disclaimer:

Picture of Disclaimer:

Follow all safety guidelines, including but not limited to:

 

1) Using two part plastic polymers and vacuum formers.

2) Powertools that you never read the instructions for.

3) All tools that you never learned to use properly.

3) Anything that heats up, pinches, cuts, squeezes or
    causes traumatic, caustic or thermal injury.  

 

We are sharing our experience, not telling you to do it.  

 

If you choose to try this then - it is at your own risk!

 

No really, we're not kidding about this.
 
Remove these adsRemove these ads by Signing Up
I found your chalkboar written instructable easier on the eyes to read. It is hence forwith declared all instyructables should be required to use said chalkboard fonts . I am serious we should adapt to change this is a definater improvement