Print PDF
Favorite
Email
Step 12Rave Circuit
This is the circuit.
I can't explain how to make it so look at those pictures.
The Transistor MUST BE NPN and it must be one that can support 12v or more and have the Heatsink in the back. Just like the one in the picture. The one I have is a TIP31C
Also NEVER NEVER Connect the 12v and Ground cable together (the ones for the switches). DOUBLE check your switches cables.
I can't explain how to make it so look at those pictures.
The Transistor MUST BE NPN and it must be one that can support 12v or more and have the Heatsink in the back. Just like the one in the picture. The one I have is a TIP31C
Also NEVER NEVER Connect the 12v and Ground cable together (the ones for the switches). DOUBLE check your switches cables.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Aug 8, 2010. 6:52 AMkingofdon
says:
that so awesome..can i use other transistor than TIP31C
Reply
4
Dec 19, 2010. 10:07 AMbeehard44
says:
you can use a mosfet
Reply
Aug 10, 2009. 9:38 AMakjian
says:
do you have msn ? . i got question to ask you ..
Reply
 |
Add Comment
|
