Print PDF
Favorite
Email
Step 13Connecting it all together
So you should have a Fan with two cables (one to spin the fan and the other to turn on the LEDs). Connect the fan cable (the one that makes it spin) just like you had it normally. The other cable (the one for the LEDs) should be connected to the Female Molex of the Rave Circuit. If you have more LED or Fans (don't connect Cold Cathols or Neon Lights... risky) just connected to the other end of the LED cable.
Now you have to options on how the Rave Circuit will obtain its audio. One can be straight from the Audio out of your computer (you will need a audio splitter) or you can plug a microphone on the female connector.
(I have personally not tested the microphone idea YET. Will work on it as soon as I have my PSU working again)
Now you have to options on how the Rave Circuit will obtain its audio. One can be straight from the Audio out of your computer (you will need a audio splitter) or you can plug a microphone on the female connector.
(I have personally not tested the microphone idea YET. Will work on it as soon as I have my PSU working again)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
