Print PDF
Favorite
Email
Step 7Under the Union Bridge
This step will explain exactly what UNDER THE UNION BRIDGE is. It will also explain how to start all three ways of wiring.
First Place the LED on the hole
Then solder a wire to the NEGATIVE terminal of the LED.
Place the second LED on the next spot (it doesn't matter if you go clock wise or counter wise)
Move down into the middle of the fan. (you might need to remove the sticker)
Slide the wire under the center plastic thing.
Move to the LED you place
Cut and Solder ON THE POSITIVE TERMINAL.
First Place the LED on the hole
Then solder a wire to the NEGATIVE terminal of the LED.
Place the second LED on the next spot (it doesn't matter if you go clock wise or counter wise)
Move down into the middle of the fan. (you might need to remove the sticker)
Slide the wire under the center plastic thing.
Move to the LED you place
Cut and Solder ON THE POSITIVE TERMINAL.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
