Introduction: Reading Light

Picture of Reading Light

An easy diy reading light made at Cairo Hackerspace circuit scribe build night.

Step 1: Parts

Picture of Parts

The components and tools you will need in this instructable :

  1. Old and empty pencils box.
  2. coin cell battery
  3. coin cell battery holder
  4. Circuit scribe pen
  5. paper cutter
  6. duct tape

  7. Any type of LEDs.

Step 2: Draw the Circuit

Picture of Draw the Circuit

Start doodle the circuit on a paper with normal pen or pencil.

Then start to draw it using circuit scribe pen.

Step 3: Cut the Box

Picture of Cut the Box

Cut the box and then put the Leds using the duck tap .

Step 4: Now You Can Start Read in the Dark in Minutes

Picture of Now You Can Start Read in the Dark in Minutes

Comments