Print PDF
Favorite
Email
Step 9Conclusion
So that's it! Now you know how to use switches to control execution of your program by reading them in and selecting an action based on the switch setting. You also know how to create a beep tone and have learned some debug strategy as well.
If you'd like to test your understanding, try modifying the last program to beep at a high pitch if even, beep a low note if odd, and blink the LED continuously if there is no change in the switches.You might want to look back at the section on debugging for help.
If you'd like to test your understanding, try modifying the last program to beep at a high pitch if even, beep a low note if odd, and blink the LED continuously if there is no change in the switches.You might want to look back at the section on debugging for help.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
