Print PDF
Favorite
Email
Step 4Mark the Epoxy Cup
Now my thumb is just over two tablespoons in area. With the drive, all I need is two tablespoons of epoxy.
Prior to mixing the epoxy, measure a tablespoon of water into a Dixie cup and mark the line of the water. Add another tablespoon of water and mark it again. This will allow us to accurately measure our epoxy and hardener. Empty the cup and dry it out with a paper towel.
Prior to mixing the epoxy, measure a tablespoon of water into a Dixie cup and mark the line of the water. Add another tablespoon of water and mark it again. This will allow us to accurately measure our epoxy and hardener. Empty the cup and dry it out with a paper towel.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
