With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This project is my attempt at creating a duct tape rose that is as realistic as possible.
Red duct tape (about 3-4 ft. per rose) Green duct tape (about 2-3 ft per rose) Red marker Green marker Floral wire (or other stiff wire) (about 10 ft)...
To form the petals, start by cutting off a piece of wire that is about a foot long and a piece of red duct tape about 4 inches long. Stick the wire to...
Start forming the rose by taking the smallest petal and loosely roll it into a tube. Then with each additional petal there are few extra things that y...
Repeat the previous steps with each additional petal. After adding a petal, stop and make adjustments as needed. The final shape is determined by the ...
Once all the petals are attached, form the stem by tightly twisting all the wires together. To cover the stem, cut off a piece of green duct tape the ...
The last thing to add is the sepals. Cut off a 3 inch piece of green duct tape and fold one end over, similar to the way the petals were made. From th...
Do some final shaping and your duct tape rose is complete. Each rose will take about 30 minutes to make. So it is not a quick crafting project, but it...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »