With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this Instructable, I'm going to show you how to really irritate your friends, family and your poor dog...A friend of mine recently visited the CES ...
The photo shows what I thought I'd need. As it turned out, the glue wasn't necessary. If you're careful with the moto-tool in the following steps, you...
Remove the balm and/or base from the Lip Balm container. This particular brand tasted horrible, so it was open to sacrifice. Remove the base from the...
Using an appropriate bit on your moto-tool, remove the inside guide from the Lip Balm Tube. Be very careful not to damage the outside edge of the tub...
Remove and dispose of the cap of the 35mm Film Container. The bottom of the container should have an indentation exactly the right size for the Lip B...
Insert the tapered end of the Lip Balm tube into the newly formed hole in the bottom of the 35mm film container. This should be tight. If there are an...
Using the moto-tool, drill a small hole somewhere between the center and bottom of the film container. The size isn't really important. It needs to be...
Carefully stretch a clean portion of the latex glove or balloon over the top of the container. It should be as smooth and tight as practical. Using t...
Using a pair of scissors, trim off the excess from the diaphragm under the rubber binder. Be very careful not to damage the diaphragm or the rubber bi...
It's done! If all went well, you should be able to place your mouth over the hole, blow and prepare for your dog to attack you! That sucker's LOUD!!! ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »