Print PDF
Favorite
Email
Step 6Where to begin?
Where to beginż things look confusing!
I start at the valve hole area and work my way around the rim clockwise. The 1st spoke seat/dimple points to the bottom layer/brake linkage side, so I cant use that one, which leaves the 2nd dimple, which happily points to the layer that Im working on. Upon popping in the spoke youll see that it fits neatly and obviously in the hole. Then I count 4 dimples and pop a spoke in the 4th one till Ive done all 10 of the upward pointing spokes.
I start at the valve hole area and work my way around the rim clockwise. The 1st spoke seat/dimple points to the bottom layer/brake linkage side, so I cant use that one, which leaves the 2nd dimple, which happily points to the layer that Im working on. Upon popping in the spoke youll see that it fits neatly and obviously in the hole. Then I count 4 dimples and pop a spoke in the 4th one till Ive done all 10 of the upward pointing spokes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
