Rebuilding a Spoked Wheel for the Royal Enfield Bullet

Step 9 The inner set of the top layer

Now the 2nd set in the top layer, i.e. the downward leading set. I start at the valve hole area again, but this time I count 6 dimples from the 1st upward spoke seat and pop in a spoke in the 6th hole.
It should be obvious to the eye that it points to the correct layer and correct spoke position.
Once I have the 1st downward spoke in position, then its a simple 4 count again working my way around the rim clockwise till the top(speedo) layer is complete.