Print PDF
Favorite
Email
Step 5The charging position
Actually the charging mode is no really needed but is really usefull because you don't need to disassemble the system for charging the batteries.
You gonna need to make a wire for connecting the charger to the amplifier.
This wire is really easy to do.
In one side use two crocodile clips for connecting to the charger( you could solder this terminals directly to the charger if you gonna use the charger just for this amplifier) and in the other side a jack for the plug that you chose for the charging position.
You gonna need to make a wire for connecting the charger to the amplifier.
This wire is really easy to do.
In one side use two crocodile clips for connecting to the charger( you could solder this terminals directly to the charger if you gonna use the charger just for this amplifier) and in the other side a jack for the plug that you chose for the charging position.
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Mar 28, 2011. 6:10 PMdasimpson1981
says:
the bit that bother me is the melted part of the charger how long was that battery charging for
Reply
Jul 14, 2009. 6:37 PMivaneduardo747
says:
Terrific pictures. Crocodile clips when plugged are actualy scary, with a Frankenstein look.
Reply
10
Apr 8, 2010. 12:37 PM
brunoip (author)
says:
brunoip (author)
says:
And when you connect the second alligator clip and the LED turns on, it is almost like saying... It is alive !!!
Reply
 |
Add Comment
|
