Print PDF
Favorite
Email
Step 5Pillars
Again, removal is dependent on your car ;)
If you have airbags, please take extra caution. Do research to find the proper way to remove your pillars containing airbags.
For my pillars (A, B and C), I used a different material. I found a dull, textured, heavy black vinyl that matched my dash. These were applied with spray on adhesive and then trimmed.
It took some practice to prevent wrinkles and sags. Vinyl + tight compound curves is a bit tricky. In the end, I have very minor defects that are not noticeable ;)
If you have airbags, please take extra caution. Do research to find the proper way to remove your pillars containing airbags.
For my pillars (A, B and C), I used a different material. I found a dull, textured, heavy black vinyl that matched my dash. These were applied with spray on adhesive and then trimmed.
It took some practice to prevent wrinkles and sags. Vinyl + tight compound curves is a bit tricky. In the end, I have very minor defects that are not noticeable ;)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
