Print PDF
Favorite
Email
Step 4Drilling the holes
You are going to need (2) holes in each cap. Start by drilling the (2) holes in (1) cap, use a piece of scrap wood to support the cap.
When you are done with the first cap, use it as a guide to drill (2) holes into the top of the remaining (2) caps. You can place the caps top-to-top when drilling the holes. Now you should have (3) caps, each with (2) holes drilled in about the same location.
When you are done with the first cap, use it as a guide to drill (2) holes into the top of the remaining (2) caps. You can place the caps top-to-top when drilling the holes. Now you should have (3) caps, each with (2) holes drilled in about the same location.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
