Print PDF
Favorite
Email
Step 7Wrap
When a section is ready it can be wrapped in wire mesh. We used old chain link, chicken wire, rebar, remesh, wire mesh fencing etc.
The bucket lids were used to fill any spaces, especially at the top of the stacks where the top buckets taper and on top of the stacks to adjust for any dips in the trench.
The mesh was bent over the top of the stacks and, where required, sewn down with strands of wire fed between stacks.
The bucket lids were used to fill any spaces, especially at the top of the stacks where the top buckets taper and on top of the stacks to adjust for any dips in the trench.
The mesh was bent over the top of the stacks and, where required, sewn down with strands of wire fed between stacks.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
